ELECTRICAL DEVICES INFO
UV/LED Lamps & Electric Nail Drills
- Before cleaning, always unplug it from the power source to prevent electrical shock or damage.
- While cleaning you must hold the device carefully ensuring that the handle does not bend, and the cord is stable.
- Use a fine cloth or a soft toothbrush to remove the settled dust and debris from the tiny crevices. It can also be cleaned gently with compressed air.
- Do not use acetone to clean the nail drill or any other parts, as it will melt the body.
- Ensure that you clean the handpiece effectively and thoroughly. Lack of effective airflow results in rapid heating of the nail drill’s handpiece. Remember to clean the handpiece regularly (at least once every two weeks) disassemble and clean the handle from any dirt.
- Remember to keep the entire electric file clean and remove all dust after each use.
Useful tips:
- The drill bit should not protrude too far, because this may cause the handpiece to vibrate and make excessive noise. The bit should not be placed too deep in the handpiece either, as pushing it too far may damage the handpiece’s mechanism. The distance between the edge of the handpiece and the lower edge of the bit head is approx. 5–10 mm.
- The handpiece heats up during operation and this is normal. Your hand also releases heat, which may result in the handpiece becoming hot.
- To turn it off, gradually reduce the speed of the nail drill, ensuring the drill has stopped working and the handpiece is not vibrating.
- Do not switch between FRW/REV modes while the nail drill is running as it may result in later problems with the handpiece.
Returns: If the nail drill is not operating as expected and you want to return it for either an exchange or refund, it's essential to ensure that the nail drill is in a clean state and that all its original components are intact. Neglecting to meet these requirements may cause delays in processing your return. Please adhere to these guidelines to facilitate a smooth and timely return experience.
Warranty: We would like to highlight that there is a 12-month warranty in place for all electronic devices, commencing from the date of purchase.
REMEMBER: Always clean your equipment after every use/client. It will keep the nail drill working smoothly.
- Before cleaning always unplug it from the power source to prevent electrical shock or damage.
- Remove any removable parts (base, trays) it will allow you to clean each part more thoroughly.
- Wipe the exterior of the lamp gently.
- Ensure all the bulbs are cool to the touch before cleaning the interior of the nail lamp. Avoid any harsh chemicals or abrasive materials that may scratch the bulbs. If there is any dirt or residue buildup on the bulbs, use a cotton swab dipped in isopropyl alcohol to clean the affected area. Wipe the bulbs with a dry cloth afterward to prevent moisture from damaging the electrical components.
- Clean the removable parts (base and trays).
- Once all parts are DRY you may reassemble the lamp ensuring they are back into their respective positions.
- Test the lamp before using your lamp again. If there are any issues, please refer to the manufacturer’s instructions or contact the manufacturer/distributor for assistance.
Useful tips:
- Bulbs are not replaceable.
- UV/LED lamps have fans inside, some of them work quietly and some of them are a bit louder.
- UV/LED lamp must always be placed on a sturdy surface preventing it from tilting/sliding.
- When a lamp is not curing the gel polish, make sure you are using the right voltage and curing time.
Returns: If the lamp is not operating as expected and you want to return it for either an exchange or refund, it's essential to ensure that the lamp is in a clean state and that all its original components are intact. Neglecting to meet these requirements may cause delays in processing your return. Please adhere to these guidelines to facilitate a smooth and timely return experience.
Warranty: We would like to highlight that there is a 12-month warranty in place for all electronic devices, commencing from the date of purchase.
REMEMBER: Always clean your equipment after every use/client. It will keep the UV/LED nail lamp working smoothly.
